Swiss Luxury Rolex replica watches UK Shop For Men.

These high omega replica uk are replicated to atmost perfect. Find the perfect style for any occasion from the best replica omega watch with Our Online Store!

Newest Swiss Rolex replica watches uk online shop for gents and ladies.

ZINC CHROME YELLOW PRIMER

Single Pack, Air Drying, Alkyd Based Composition with Zinc Chromate Pigment.

Suitable for steelworks and non-ferrous metals in mild industrial and inland environments. It may be used as either shop or field applied primer for all general structural steel, cranes, towers, tanks, equipment etc.

Zinc Chromate Yellow Primer is an air drying primer recommended for direct application on ferrous surfaces after appropriate surface preparation. Suitable for over coating with conventional enamels and chlorinated rubber paints.

Zinc Chromate Yellow Primer is formulated with special type of resin which gives good adhesion and gives Excellent Corrosion resistance to metal. It can be easily brushed or sprayed to form a hard and tough adherent coating.

FEATURES:

1. Anti-corrosive primer for conventional system

2. Can be top-coated with conventional or chlorinated rubber coatings

3. Easy application by brush and conventional spray

RED OXIDE PRIMER

Single pack, air drying, oleoresinous composition with zinc chrome & red oxide pigments.

This material is suitable for use as a Primer in the painting system normally followed for enamels for metal surfaces. It is used for the protection of all types of ferrous substrates e.g. steel windows, grills, gates etc.

Red Oxide Primer is formulated with special type of resin which gives good adhesion and gives fair corrosion resistance to metal. It can be easily brushed or sprayed to form a hard and tough adherent coating.

It is an air drying primer recommended for direct application on ferrous surfaces after appropriate surface preparation. Suitable for over coating with conventional enamels and chlorinated rubber paints.

FEATURES:

1. Designed as an anticorrosive primer for industrial application.

2. Suitable for use in mildly corrosive environments.

3. Easy application by brush.

ZINC PHOSPHATE PRIMER

Single pack, air drying alkyd modified composition with Red oxide and Zinc phosphate pigments

Bridges, Cranes, towers, equipment, tanks etc and specially as a primer on general structural steel subject to aggressive atmospheric corrosion

Zinc Phosphate Primer Grey is an air drying primer recommended for direct application on ferrous surfaces after Appropriate surface preparation. Suitable for over coating with conventional enamels and chlorinated rubber paints.

A high performance anticorrosive primer based on Phenolated alkyd medium and Zinc Phosphate pigment. The primer gives satisfactory performance on mild steel surface in aggressive coastal and humid environment. It is compatible with a wide range of top coats, e.g. synthetic enamels, bituminous paints, aluminum paints as well as chlorinated rubber paints.

FEATURES:

1. Anti-corrosive primer for industrial application

2. Suitable for use in mildly corrosive environments

3. Easy application by brush

ENAMEL PAINTS

Single pack, air drying, high gloss alkyd finishing paint

Recommended for use on tank exteriors, structural’s, pipelines, cladding, gantries, etc

It is recommended to apply over metal surfaces after appropriate surface preparation.

Enamel is specially blended alkyd based Synthetic Enamel. It has no added lead or chrome compounds thus making it safe. It has excellent gloss retention and is suitable for a wide variety of interior and exterior metal, wood and masonry surfaces.

FEATURES:

1. Glossy enamel suitable for interior and exterior use under industrial & coastal atmospheric conditions.

2. Easy application by brush with excellent flow.

3. Good weather resistance.

4. Good color retention.

5. Can be applied over adherent alkyd, epoxy and polyurethane coatings.

6. General purpose enamel suitable for industrial atmospheric conditions.

EPOXY PRIMERS

Two component, Epoxy Primer with Zinc Phosphate pigment

Epoxy Primer possesses a history of success in various fertilizer, refineries, chemical and other plants applied in diverse areas – tanks, equipment, pipelines, structural steel etc.

ZP has excellent adhesion and better tolerance in field application variables than other types of coatings. Cures to a hard tough film with excellent corrosion & chemical resistance.

ZP has excellent adhesion and better tolerance in field application variables than other types of coatings. Cures to a hard tough film with excellent corrosion & chemical resistance.

Zinc phosphate primer Grey is a general purpose protective primer recommended for protection of structural steel, equipment, conveyors, storage tanks etc in mild to moderate chemical exposure environment. It has good adhesion on steel.

FEATURES:

1. Designed as an epoxy primer with very good resistance to saline, marine and chemical environments.

2. Good adhesion on steel and aged epoxy coatings.

3. Ease of application by spray & brush.

4. Can be over coated with alkyd, chlorinated rubber, acrylic, epoxy, polyurethane coating.

EPOXY MIO (MICACEOUS IRON OXIDE)

Two component, high build, micaceous iron oxide pigmented polyamide cured epoxy coating

This is a two component amide cured epoxy coating. It is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as mid coat, finish coat or as single coat system in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel, aluminum and concrete substrates. It can be applied at sub zero surface temperatures.

Suitable for protection of steel structures in aggressive coastal and industrial atmosphere, Application include ship loaders, hopper conveyors, silos, storage tanks, pipelines and general structural’s in fertilizer plants, refineries, petrochemicals etc.

A High build epoxy miceaceous iron oxide coating specially formulated for the protection of steel and concrete surfaces exposed to humid, saline and chemical environment. This coating when over coated by Polyurethane Finish immensely upgrades the anticorrosive performance of the system with outstanding weathering resistance.

MIO paint is recommended for use as a barrier over suitable primed surface for protection of surfaces in Marine and Chemical environments.

FEATURES:

1. Designed as an epoxy intermediate in protective coating systems.

2. Good resistance to moisture and saline conditions.

3. Easy application by brush, conventional and airless spray.

EPOXY PAINTS

Two component, high build, polyamide cured epoxy coating

A High build epoxy coating specially formulated for the protection of steel and concrete surfaces exposed to humid, saline and chemical environment. This coating when over coated by Polyurethane finish immensely upgrades the anticorrosive performance of the system with outstanding weathering resistance and colour retention.

A epoxy coating specially formulated for the protection of steel and concrete surfaces exposed to humid, saline and chemical environment.

This is a two component, polyamide cured, high molecular weight epoxy coating. It has a semi gloss finish with fair gloss retention. Can be used as primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment. To be used as topcoat in atmospheric and immersed environments.

Finish paint is an epoxy matt coating recommended for application on primer or intermediate after proper surface preparation. This coating when applied in conjunction with proper primer, provides a protection against natural weather, corrosive and humid atmosphere in fertilizer, Petrochemical & chemical processing industry. It possess outstanding mechanical properties viz., adhesion ,flexibility High film thickness can be achieved in a single coat.

FEATURES:

1. Recommended as intermediate and/ or as a top coat in most of the epoxy systems.

2. Good adhesion on aged epoxy coatings.

3. Can be recoated with epoxy, polyurethane, chlorinated rubber, acrylic and conventional coatings even after long.

4. Weathering period.

5. Good resistance to water and splash of mild chemicals.